Search For Leupold Riflescope Vx Ii 3 9x40mm Matte at Amazon
|
In this article, I have given the results of an in-depth evaluation of the Leupold & Stevens, Mark 4 ER/T 3.5-10X40MM M5 Scope with mil-dot reticle (Part No: 11080). Leupold has been stated as being one of the best optics makers in the world supplying their merchandise to sportsmen, law enforcement, and the military to be proven as rugged and reliable. I’ve had the experience of using these optics in respective actions such as sport shooting, training, and in law enforcement. I’d introductory like to state that Leupold sent the scope to me well packaged and it shipped exceedingly fast. In the box Leupold included the scope, flip-up lens covers, adjustment wrench, all the miscellaneous paperwork and even a nice Leupold vinyl cut logo window sticker. For the basics, here is the selective information listed directly from the Leupold website with the features and specifications of the scope: • The Xtended Twilight Lens System™ optimizes the transmission of low-light wavelengths, so you see the details of low-light scenes in greater, more brilliant detail than with any other rifle-scope available. In addition, I like to add numerous info in regards to the Leupold Mark 4 M5 series. These are MIL / MIL scopes. And for me, this is the introductory MIL / MIL scope I have ever used. All my former experience with precision and long range shooting has been on MIL / MOA scopes. The adjustments on the M5 series permitted me to break the adjustments into tenths based on the mildot reticle. Therefore, all my MOA selective information had to be converted to use with the MIL / MIL scope. At introductory I thought this would be tough doing all the conversions and learning a new system, however, to my surprise it was in truth easy. Since I used the ordinary scheme for all my data, everything was in yards and inches and the conversion from MOA to MIL involved galore simple math. Once I had everything converted correctly and double checked it by practical application, I found the MIL / MIL system easier, more precise, and much more quickly to use than the MIL / MOA scheme I had antecedently used. I don’t think I would ever go back to a MIL / MOA scope. As with the other Leupold merchandise I have used in the past, this one was built to the same quality and standards. The scope itself was easy to manipulate with audible and positive adjustments for the elevation and windage knobs. The variable power selector ring was likewise easy to adjust and not so stiff that you had to strong arm it like other scopes I have used. This queer scope also applied the round mildot reticle scheme (0.2 MIL dots), and is a firstborn focal plane scope, permitting the reticle to be rectify on any power. And lastly it had a parallax focus knob on the left side of the scope employed to fetch the target to the same focal plane as the mildot reticle, which was very smooth and precise. So, to begin the evaluation I introductory mounted the Leupold Mark 4 scope on a Remington 700 VSF,.308 caliber rifle, which had been bedded and accurized, to give it a great commence for the precision weapon system. For the actual mounting, I employed a Leupold Mark 4, 15 MOA slope, one-piece base (Part No: 59235) and a set of Leupold Mark 4, medium height rings (Part No: 61049). I chose the medium height because I prefer to have the scope as low on the weapon and as close to the line of bore as possible. I also accessorized the precision weapon system with a Turner Saddlery AWS sling, Harris Bi-pod, Uncle Mike’s Military QD Sling Swivels, and an Eagle Industries cheek piece. Next I hit the range. I started with the primary zeroing of the weapon using Federal Match Grade, 168gr, Sierra Boat-tailed Hollow Point ammunition. It took precisely three rounds to get the P.O.A. (Point of Aim) and P.O.I. (Point of Impact) to “zero” at 100 yards. After the initial zeroing and cleaning, I went through assorted grouping shots and for the duration of the introductory testing, applied the mil-dot reticle in the scope on the lowest power of 3.5. I found that not only was the M5 adjustments easy to use, they were very precise. The final grouping tests results were as follows: Seated Bench Position, 100 yards, 3 shots, 3/8″ group. And lastly, using 18″ X 24″ white poster board and 6″ colored balloons, I set up targets at 200 and 300 yards. I had another person randomly change my windage and elevation adjustments to throw off my zero and shot to test the MIL / MIL holds. I found this to be the most effective share of the whole system, as it permitted me to make a very quick “hold” adjustment to my initial missed shot, for a hit on the follow up shot. If the shot is a miss and you may see, or saw, the P.O.I., you merely measure the number of MILs in 1/10th increments for elevation and windage and hold your P.O.A. for the correction. Using this system, I was capable to make follow up shots in less than five seconds for a positive hit on the balloons. Overall, I give the new Leupold Mark 4 ER/T 3.5-10X40MM M5 MIL / MIL scope a 10 out of 10 rating for quality and performance. If you’re in the market for a new scope, whether it be for tactical use, precision sport shooting, or hunting, I would not hesitate in purchasing one of these Leupold Optics. |
